nonavalveclaw

To adjust the fuel pressure in your burner (which we do not recommend), turn the adjusting screw counter-clockwise to decrease fuel flow; clockwise to increase fuel flow. If you notice smoky or eye burning exhaust coming from your machine, it probably needs adjusting. Be sure to keep your fingers off the metal parts of the screwdriver. Not to mention that it doubles the time between regular de-scaling maintenance of the schedule 80 coils.

This solenoid, which is normally closed, is activated by a flow-switch when water is flowing through it. We recommend the Hydrotek Hot Water Pressure Washers. in the morning, turned on their hose and put out the fire. Some people prefer Landa, but we have tried them all. Diesel fuel can be used also. A clogged filter will cause blockage and it will turn off the burner due to lack of fuel flow. Please don't touch that screw! ? Call the dealer. Lay the blade across one contact and within 1/2 inch of the other contact.Air Adjustments Usually steam cleaners are factory adjusted for operation at seventy-five feet above sea level.Manual Butterfly Valve Manufacturers how the fuel system works on your hot water pressure washer or steam cleaner.

The transformer should arc with a small lightening bolt over the 1/2 inch distance. All this because the water wasn't staying hot while we were cleaning sidewalks in the middle of the night and we thought we'd adjust the fuel pressure screw. It also saves fuel and prolongs the life of the insulation.Fuel flow to your steam cleaner is by far the most serious part of your machine, it can cause the most damage if not monitored or working correctly.net/wttbbs. Play it safe, inspect it regularly and don't get hurt or caught up in a lawsuit. Be careful not to touch this because it is something like 10,000 volts. This wouldn't have helped anyway because we had a water flow problem that was shutting off the water butterfly valve gearbox Manufacturers early before it reached the correct temperature. We've also nearly eliminated combustion smoke associated with our units by incorporating this shut-off gun. So you see you really can learn from our twenty years experience. So we drove down the street engulfed in flames and smoke, found a water spigot and hose at someone's house at one a.

Warning: Never exceed 145 lbs. But first, make sure you are burning clean fuel. of fuel pressure; If you do, you will create a giant flame out the top of your steam cleaner. If you mess it up it could catch on fire and if you are not right there to put it out, you could potentially lose your machine. With this patented solenoid in place on the machine we believe it to be a much safer piece of equipment.I recommend periodic inspection to insure that the fuel solenoid valve functions correctly. The solenoid allows us to maintain safety by eliminating high and low water temperatures.